Component Test - Video Camera: Milan
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Measure the resistance between the video camera pins, component side, as follows:
TERMINAL RESISTANCE REFERENCE TABLE
| Video Camera Pins | Resistance |
|---|---|
| 4 and 6 | 38-49 ohms |
| 5 and 6 | 39-48 ohms |
| 4 and 5 | 74-101 ohms |
If the resistance values for the video camera are within the specifications listed, the video camera is functional at this time.
If the resistance values for the video camera are not within the specifications listed, the video camera is inoperative at this time. Install a new video camera. Refer to Removal and Installation . Test the system for normal operation.