Secondary Shaft Gear Shim Thickness Specification Table

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

SECONDARY SHAFT GEAR SHIM THICKNESS SPECIFICATION TABLE

mm	Inch
0.20	0.007
0.25	0.009
0.30	0.011
0.35	0.013
0.40	0.015
0.45	0.017
0.50	0.019
0.55	0.021
0.60	0.023
0.65	0.025
0.70	0.027