Fuel Injection Control Module (FICM)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2005 Ford RV Cutaway, 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
The coil-operated spool valve requires 48 volts at up to 20 amps to operate, which is more power than the PCM can supply. Therefore, a high power device, the FICM, is used to supply power to the solenoid on command from the PCM.