LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1235 (Seat System - Seats) >> Diagnosis And Testing >> Seats >> Pinpoint Tests >> Pinpoint Test B: The Power Seat is Inoperative - Driver, Without Power Recline >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The driver seat control switch is supplied battery voltage on circuit SBB32 (VT/RD) and ground on circuit GD126 (BK/WH). The seat control switch then supplies voltage and ground to the appropriate circuits to operate the seat motors.

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals