LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1210 (Exterior Lighting System) >> Removal And Installation >> Ballast >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the headlamp assembly. For additional information, refer to Removal and Installation .
  2. Remove the 4 screws and the ballast.
    • Disconnect the electrical connectors.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals