LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1181 (Automatic Transaxle - 6F35) >> In-Vehicle Repair >> Transaxle Filler Tube >> Installation

Transaxle Filler Tube: Installation

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the O-ring seal on the transaxle filler tube for damage and install a new O-ring if needed. Lubricate the O-ring seal with clean automatic transmission fluid.
    Fig 1: Locating O-Ring Seal
    G06278298Courtesy of FORD MOTOR CO.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals