DTC P2015: Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance (Bank 1)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P2015: INTAKE MANIFOLD RUNNER POSITION SENSOR/SWITCH CIRCUIT RANGE/PERFORMANCE (BANK 1)
| Description: | The intake manifold runner control (IMRC) system is monitored for failures. Each DTC distinguishes the corresponding bank. The test fails when the system detects the presence of a broken or persistently out of range linkage. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HU . | ||