DTC P0390: Camshaft Position Sensor B Circuit (Bank 2)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0390: CAMSHAFT POSITION SENSOR B CIRCUIT (BANK 2)
| Description: | The test fails when the powertrain control module (PCM) can no longer detect the signal from the camshaft position (CMP) sensor on bank 2. | ||
| Possible Causes: | See the possible causes for DTC P0365 . | ||
| Diagnostic Aids: | See the diagnostic aids for DTC P0365 . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DR . | ||