LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1173 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P0088: Fuel Rail/System Pressure - Too High

DTC P0088: Fuel Rail/System Pressure - Too High

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0088: FUEL RAIL/SYSTEM PRESSURE - TOO HIGH

Description:  The powertrain control module (PCM) regulates the fuel rail pressure by controlling the fuel volume regulator. When the PCM is no longer capable of maintaining the fuel pressure within the calibrated parameters, the DTC is set.
Possible Causes: 
  • Damaged fuel injection pump
Diagnostic Aids: 
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST HP .