LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1167 (Engine Controls - Powertrain DTC Charts & Descriptions - (Hybrid)) >> DTC Diagnosis >> P0344 - Camshaft Position Sensor A Circuit Intermittent (Bank 1 Or Single Sensor)

P0344 - Camshaft Position Sensor A Circuit Intermittent (Bank 1 Or Single Sensor)

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0344 - CAMSHAFT POSITION SENSOR A CIRCUIT INTERMITTENT (BANK 1 OR SINGLE SENSOR)

Description:  The test fails when the powertrain control module (PCM) detects an intermittent signal from the camshaft position (CMP) sensor.
Possible Causes: 
  • Intermittent open circuit
  • Intermittent short circuit
  • Damaged sensor shielding
  • Damaged sensor
Diagnostic Aids:  Harness routing, harness alterations, incorrect shielding, or electrical interference from other systems may have an intermittent impact on the CMP signal.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All - - GO to PINPOINT TEST DR .