Section 1136 (Automatic Transmission - 5R110W (TORQSHIFT(R))): Disassembly: Transmission: Notes
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Aligner, Clutch Spring Compressor | 307-455 | |
| Compressor, Clutch Spring | 307-015 (T65L-77515-A) | |
| Fixture Body, Coast Clutch | 307-385 | |
| Fixture Handle, Coast Clutch | 307-384 | |
| Handle | 205-153 (T80T-4000-W) | |
| Handle, Torque Converter | 307-091 (T81P-7902-C | |
| Loading Fixture, Clutch | 307-S383 | |
| Remover, Output Shaft Seal/Housing | 307-460 | |
| Remover, Pilot Bearing | 308-001 (T58L-101-B) | |
| Remover, Torque Converter Fluid Seal | 307-309 (T94P-77001-BH) (used with 100-001) | |
| Remover, Transmission Extension Housing Seal (used with 307-309) | 307-454 | |
| Remover, Transmission Fluid Pump | 307-221 (T89T-70010-A) | |
| Retainer, Torque Converter | 307-346 (T97T-7902-A) | |
| Retaining Ring Pliers | 307-343 (T95P-77001-AHR) | |
| Roll Pin Set | 211-S060 (T78P-3504-N) | |
| Slide Hammer | 100-001 (T50T-100-A) | |
| Socket, Output Shaft Lock nut | 307-458 |