LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1136 (Automatic Transmission - 5R110W (TORQSHIFT(R))) >> Disassembly And Assembly Of Subassemblies >> Input Shell Assembly

Input Shell Assembly

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean and inspect the forward/reverse sun gear and input shell assembly. Check the sun gear teeth, lug teeth and thrust surface for damage. If any evidence of damage is found, a new input shell assembly must be installed.
    2. Fig 1: Inspecting Forward/Reverse Sun Gear And Input Shell Assembly
    GF0006952Courtesy of FORD MOTOR CO.
  2. Inspect the front bushing for damage. If any damage is found a new input shell assembly must be installed.
    3. Fig 2: Inspecting Front Bushing For Damage
    GF0006953Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals