LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1136 (Automatic Transmission - 5R110W (TORQSHIFT(R))) >> Disassembly And Assembly Of Subassemblies >> Forward Hub and Ring Gear >> Assembly

Forward Hub and Ring Gear: Assembly

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. To assemble, reverse the disassembly procedure.
    • Lightly lubricate the thrust washer with petroleum jelly to hold it in place during assembly.
    • When installed, make sure the retaining ring is fully seated in the forward ring gear ring groove. The tips must face downward against the hub.
scientia non olet · About LEMON Manuals