LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1135 (Climate Control) >> Removal And Installation >> Compressor to Condenser Discharge Line - 4.6L, 5.4L and 6.8L >> Notes

Compressor to Condenser Discharge Line - 4.6L, 5.4L and 6.8L: Notes

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
PAG Refrigerant Compressor Oil (R-134a Systems)
YN-12-D
WSH-M1C231-B
Fig 1: Exploded View Of Compressor To Condenser Discharge Line With Torque Specifications - 4.6L, 5.4L & 6.8L
GF0044856Courtesy of FORD MOTOR CO.
Item Part Number Description
1 W520413 A/C compressor discharge fitting nut
2 - High-pressure cutoff switch electrical connector (part of 12A581)
3 W520413 Condenser inlet fitting nut
4 19972 Compressor-to-condenser discharge line
5 19B596 O-ring seal and gasket seal kit (2 required)