Standard Torques - Class 12.9 Metric Bolts And Studs

WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

STANDARD TORQUES - CLASS 12.9 METRIC BOLTS AND STUDS

Thread Diameter	Thread Pitch (mm/thread)	Torque^a
6 mm	1	15 Nm (133 lb-in)
8 mm	1.25	36 Nm (27 lb-ft)
10 mm	1.5	72 Nm (53 lb-ft)
12 mm	1.75	126 Nm (93 lb-ft)
14 mm	2	201 Nm (148 lb-ft)
15 mm	2	252 Nm (186 lb-ft)
16 mm	2	311 Nm (230 lb-ft)
18 mm	2.5	430 Nm (317 lb-ft)
20 mm	2.5	608 Nm (448 lb-ft)

^a Tolerances are ±10% of nominal value.