LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1130 (Engine - 6.0L (99P E-Series) Diesel) >> In-Vehicle Servicing >> Oil Pan - Upper >> Removal

Oil Pan - Upper: Removal

WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lower oil pan. For additional information, refer to Oil Pan - Lower .
  2. Remove the bolts and the upper oil pan.
    • Remove and discard the press-in-place gasket. Clean and inspect the sealing surfaces.
    3. Fig 1: Identifying Upper Oil Pan Bolts
    G03887278Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals