LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1127 (Engine - 6.8L) >> In-Vehicle Servicing >> Oil Pump >> Removal

Oil Pump: Removal

WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the fuel system pressure. For additional information, refer to FUEL SYSTEM - GENERAL INFORMATION - GASOLINE AND DIESEL article.
  2. Remove the timing drive components. For additional information, refer to Timing Drive Components .
  3. Remove the oil pan. For additional information, refer to Oil Pan .
  4. Remove the 3 bolts and the oil pump.
    5. Fig 1: Locating Oil Pump Bolts
    G03962525Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals