Oil Level Indicator and Tube: Installation
WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Using a new O-ring seal, position the oil level indicator and install the bolt.
- Tighten to 10 Nm (89 lb-in).
- Install the front oil level indicator and tube support bracket nut.
- Tighten to 25 Nm (18 lb-ft).
- Install the LH exhaust manifold. For additional information, refer to Exhaust Manifold - LH .
- Install the air cleaner outlet pipe and the air cleaner. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING article.
NOTE:
Lubricate the O-ring seal with clean engine oil prior to installation.