LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1127 (Engine - 6.8L) >> In-Vehicle Servicing >> Flexplate >> Installation

In-Vehicle Servicing: Flexplate: Installation

WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the flexplate and tighten the 8 bolts in 2 stages, in the sequence shown.
    • Stage 1: Tighten to 20 Nm (15 lb-ft).
    • Stage 2: Tighten to 80 Nm (59 lb-ft).
    2. Fig 1: Flexplate Bolts Torque Sequence
    GF0011781Courtesy of FORD MOTOR CO.
  2. Install the transmission. For additional information, refer to AUTOMATIC TRANSAXLE/TRANSMISSION - 4R70E/4R75E article.
scientia non olet · About LEMON Manuals