LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1121 (Engine - 4.6L And 5.4L) >> In-Vehicle Servicing >> Oil Level Indicator and Tube >> Removal

Oil Level Indicator and Tube: Removal

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine air cleaner (ACL) and the air cleaner outlet pipe. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING article.
  2. Remove the LH exhaust manifold. For additional information, refer to Exhaust Manifold - LH .
  3. Remove the nut, the bolt and the oil level indicator and tube.
    • Discard the O-ring seal.
  4. Inspect the oil level indicator tube for damage.
scientia non olet · About LEMON Manuals