LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1121 (Engine - 4.6L And 5.4L) >> In-Vehicle Servicing >> Hydraulic Lash Adjuster >> Installation

Hydraulic Lash Adjuster: Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the hydraulic lash adjusters with clean engine oil prior to installation.
  1. Install the hydraulic lash adjusters in their original locations.
    2. Fig 1: Locating Hydraulic Lash Adjusters
    GF0002630Courtesy of FORD MOTOR CO.
  2. Install the camshaft roller followers. For additional information, refer to Camshaft Roller Follower .
scientia non olet · About LEMON Manuals