Engine Emission Control - 6.0L Diesel

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The EGR system includes:

EGR valve actuator/pintle position sensor.
EGR cooler assembly.

The EGR system reduces the peak combustion temperatures and oxides of nitrogen (NOx). The EGR valve is an electromechanical device that uses a linear actuator to control the relative position of the valve's pintle. This device also has a built-in pintle position sensor that functions to provide the PCM with a feedback signal. This output signal provides the information on the valve position relative to its seat. The advantage of this "closed loop" feedback is the ability to continuously vary exhaust gas flow to match operating conditions. The EGR cooler cools a portion of the engine exhaust gases and then recirculates them back into the inlet air stream. This increases the engine's tolerance for EGR and reduces the amount of smoke formed by exhaust gas dilution of the mixture.