LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1100 (Interior Lighting) >> Removal And Installation >> Cargo Lamp >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 lens-to-cargo lamp screws.
    2. Fig 1: Cargo Lamp Lens Screws
    GF0012953Courtesy of FORD MOTOR CO.
  2. Remove the cargo lamp.
    • Remove the 2 screws.
    • Disconnect the electrical connector.
    3. Fig 2: Cargo Lamp, Screws & Electrical Connector
    GF0012954Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals