LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1097 (Exterior Lighting System) >> Diagnostic Tests >> Stoplamp >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of mechanical or electrical damage.
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Multifunction switch
    • Central junction box (CJB) fuse(s):
      • 11 (15A) (stoplamp switch)
      • 39 (10A) (stoplamp)
    • Bulb(s)
    • Wiring, terminals or connectors
    • Stoplamp switch
    • Multifunction switch
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the concern is not visually evident, verify the symptom. Go to Symptom Chart .