LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1091 (Suspension System - General Information) >> Description And Operation >> Wheel Alignment Angles >> Camber

Wheel Alignment Angles: Camber

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camber (Viewed from Front)
GF0000016Courtesy of FORD MOTOR CO.

Camber is the vertical tilt of the wheel when viewed from the front. Camber can be positive or negative and has a direct effect on tire wear.

scientia non olet · About LEMON Manuals