LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1063 (Power Transfer Unit (PTU)) >> In-Vehicle Servicing >> Output Shaft Seal >> Installation

Output Shaft Seal: Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the PTO Drive Gear Outer Oil Seal Installer, install the PTU output shaft oil seal.
    2. Fig 1: Installing PTU Output Shaft Oil Seal
    GF0025453Courtesy of FORD MOTOR CO.
  2. Install the deflector.
  3. Install the PTU output shaft flange. For additional information, refer to Output Flange .
scientia non olet · About LEMON Manuals