LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1059 (Front Suspension System) >> Removal And Installation >> Wheel Studs >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel bearing and hub. For additional information, refer to Wheel Bearing and Wheel Hub .
  2. Using a suitable press, remove the wheel stud from the wheel hub.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals