Removal and Installation
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the A/C cycling switch (19E561) electrical connector.
- Remove the screws and slightly position the suction accumulator (19C836) aside.
- Remove the screws.
- Disconnect the electrical connector and remove the blower motor speed control.
- To install, reverse the removal procedure.