Setup Displays: Notes

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The setup (SETUP button) displays are timed modes and terminate after a finite interval. As part of the setup menu, the message center has the capability to configure items such as units (English or metric), autolamp delay, to enable/disable a variety of options such as autolock and auto-unlock, or to carry out calibrations/settings on items such as oil life.

On configurable items such as autolock and auto-unlock, the message center indicates the appropriate selection (ON/OFF) by bracketing the selection. For example, if the driver selects the autolock feature on, the message would display as follows: AUTOLOCK <ON> OFF. If the driver selects the autolock off, the message would display as follows: AUTOLOCK AID ON <OFF>. For additional information on configurable items, refer to the Owner's Literature.

The setup display modes are:

Reset to English (if set in another language)
System check
Oil life reset/oil life starting value
Units English/metric
Autolamp delay in seconds (if equipped)
Autolock on/off (if equipped)
Auto-unlock on/off (if equipped)
Language