LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1004 (Safety Belt System) >> Description And Operation >> Safety Belt System >> Safety Belt Extension Assembly

Safety Belt Extension Assembly

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

In certain cases, the safety belt may be too short even when it is fully extended. About 20 cm (8 in) can be added to the belt length by using a safety belt extension. Safety belt extensions are available at no cost from any Ford or Lincoln-Mercury dealer parts department. Safety belt extensions are only available with black webbing.

Use only extensions manufactured by the same supplier as the safety belt. Manufacturer identification is located at the end of the webbing on the label. Also, use the safety belt extension only if the safety belt is too short for you when fully extended. Do not use an extension to change the fit of the shoulder belt across the torso.