DTC P2106: Throttle Actuator Control (TAC) System - Forced Limited Power
P2106 - THROTTLE ACTUATOR CONTROL (TAC) SYSTEM - FORCED LIMITED POWER
| Description: | The TAC system is in the failure mode effects management (FMEM) mode of forced limited power. This DTC indicates the FMEM action is in effect due to a concern in an electronic throttle control (ETC) related component or module. | ||
| Possible Causes: | |||
| Diagnostic Aids: | This DTC is an informational DTC and may be set in combination with a number of other DTCs which are causing the FMEM. Diagnose other DTCs first. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test QE . | ||