DTC P1709: Park/Neutral Position (PNP) Switch Out Of Self-Test Range
P1709 - PARK/NEUTRAL POSITION (PNP) SWITCH OUT OF SELF-TEST RANGE
| Description: | This DTC indicates that the voltage is high when it should be low. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | When activating either the PNP or CPP switch, the voltage should cycle from 5 volts to low. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the appropriate AUTOMATIC TRANSAXLE/TRANSMISSION article . | ||