LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid) >> DTC Diagnosis >> DTC P1463: Air Conditioning Pressure Sensor (A/Cp) Insufficient Pressure Change

DTC P1463: Air Conditioning Pressure Sensor (A/Cp) Insufficient Pressure Change

P1463 - AIR CONDITIONING PRESSURE SENSOR (A/CP) INSUFFICIENT PRESSURE CHANGE

Description:  Each time the A/C clutch engages, the powertrain control module (PCM) is looking for a pressure change in the refrigerant. If the change in pressure is outside of the calibration the DTC sets.
Possible Causes: 
  • A/C system mechanical failure
  • Open ACP or VREF circuit
  • A/C sensor damaged
  • A/C system electrical failure
  • A/C clutch always engaged
Diagnostic Aids:  Verify the A/C system function, including refrigerant charge. Refer to the appropriate CLIMATE CONTROL SYSTEM - GENERAL INFORMATION & DIAGNOSTICS article .
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All - - GO to Pinpoint Test DS .