LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid) >> DTC Diagnosis >> DTC P1125: Throttle Position Sensor A Intermittent

DTC P1125: Throttle Position Sensor A Intermittent

P1125 - THROTTLE POSITION SENSOR A INTERMITTENT

Description:  The throttle position (TP) sensor circuit is monitored by the powertrain control module (PCM) for sudden TP rotation angle or voltage input change through the comprehensive component monitor (CCM). If during the last 80 warm-up cycles in key ON, engine running the PCM detects TP rotation angle or voltage changes beyond the minimum or maximum calibrated limit, a continuous DTC is stored.
Possible Causes: 
  • Poor continuity through the TP sensor connectors
  • Poor continuity through the TP harness
  • Intermittent open or short inside the TP sensor
Diagnostic Aids:  While accessing the TP V PID on the diagnostic tool, lightly tap on the TP sensor or wiggle the TP sensor connector and harness. If the TP V PID suddenly changes below 0.49 volt or above 4.65 volts, an intermittent concern is present.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All - - GO to Pinpoint Test DH .
scientia non olet · About LEMON Manuals