LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid) >> DTC Diagnosis >> DTC P0704: Clutch Pedal Position (CPP) Switch Malfunction

DTC P0704: Clutch Pedal Position (CPP) Switch Malfunction

P0704 - CLUTCH PEDAL POSITION (CPP) SWITCH MALFUNCTION

Description:  When the clutch pedal is applied the voltage goes to low. If the powertrain control module (PCM) does not see this change from high to low the DTC is set.
Possible Causes: 
  • CPP circuit short to voltage
  • Damaged CPP switch
  • CPP circuit open in the SIGRTN
Diagnostic Aids:  When the clutch pedal is applied and then released, the CPP switch voltage should cycle.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test TA . - GO to Pinpoint Test TA .
scientia non olet · About LEMON Manuals