LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid) >> DTC Diagnosis >> DTC P0626: Generator Field Terminal Circuit High

DTC P0626: Generator Field Terminal Circuit High

P0626 - GENERATOR FIELD TERMINAL CIRCUIT HIGH

Description:  The powertrain control module (PCM) monitors generator load from the generator/regulator in the form of frequency. The concern indicates the input is higher than the load should be in normal operation. The load input could be high when a battery short to ground exists.
Possible Causes: 
  • GENLI circuit short to voltage
  • GENRC circuit short to voltage
  • B+ open prior to start-up
  • Open GENRC prior to start-up
  • Open ILC prior to start-up
Diagnostic Aids:  Verify the battery voltage is 14.5 volts. Verify the generator/regulator has the correct part number.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test HY .
scientia non olet · About LEMON Manuals