LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid) >> DTC Diagnosis >> DTC P0108: Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High

DTC P0108: Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High

P0108 - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR HIGH

Description:  Sensor operating voltage is greater than 5 volts (VREF). As a result it failed above the maximum allowable calibrated parameter.
Possible Causes: 
  • VREF shorted to VPWR
  • MAP signal shorted to VPWR
  • VREF should be less than 6.0 volts. The PID reading is in frequency/volts
  • Open circuit
Diagnostic Aids:  VREF should be greater than 4.0 volts. The PID reading is in frequency/volts.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test DM .
scientia non olet · About LEMON Manuals