LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Pinpoint Test KE: Idle Air Control (IAC) Valve Through Pinpoint Test Z: Intermittent - (Except Diesel & Hybrid) >> Pinpoint Test ND: Engine Rpm\Vehicle Speed Limiter Reached >> Test Procedure

Test Procedure

  1. ND1 DTCS P0219, P0297 OR P1270: EXCESSIVE ENGINE RPM OR VEHICLE SPEED 
    • P0219 (engine over speed), P0297 (vehicle over speed) or P1270 diagnostic trouble codes indicate the vehicle was operated in a manner which caused the engine or vehicle speed to exceed a calibrated limit.
      • Excessive engine RPM in NEUTRAL or operated in the wrong transmission gear.
      • Excessive wheel slippage (water, ice, mud or snow).
      • Vehicle driven at a high rate of speed.

    Was the vehicle operating in any of the above conditions? 

    Yes No
    The on-board diagnostics (OBD) system is OK. REFER to STEP 2: NO DIAGNOSTIC TROUBLE CODES (DTCS) PRESENT SYMPTOM CHART INDEX .
    RETURN the vehicle to customer with information about the DTC. If there are no other symptoms, RETURN the vehicle to the customer with information about the DTC.
scientia non olet · About LEMON Manuals