LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Control System >> Removal And Installation >> Power Steering Pressure (PSP) Switch >> Removal and Installation

Removal and Installation

Fig 1: Power Steering Pressure (PSP) Switch With Torque Specifications
G04652597Courtesy of FORD MOTOR CO.
  1. Disconnect the power steering pressure (PSP) switch electrical connector.
  2. Remove the PSP switch.
    • To install, tighten to 20 Nm (15 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals