LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> In-Vehicle Repair >> Oil Pump Screen and Pickup Tube >> Installation

Oil Pump Screen and Pickup Tube: Installation

  1. Clean and inspect all mating surfaces.
  2. Install the 2 oil pump screen and pickup tube bolts and the oil pump screen and pickup tube with a new mounting gasket.
    • Tighten to 10 Nm (89 lb-in).
  3. Install the oil pan. For additional information, refer to OIL PAN  in this article.
scientia non olet · About LEMON Manuals