LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> In-Vehicle Repair >> Oil Level Indicator and Tube >> Removal and Installation

Removal and Installation

    NOTE: 2.3L engine shown, 2.0L engine similar with only one retaining bolt.
  1. Remove the oil level indicator and position aside.
  2. Remove the 2 bolts for 2.3L engines or the 1 bolt for 2.0L engines and the oil level indicator tube.
    • To install, tighten to 10 Nm (89 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals