LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Camshaft Lobe Lift

Camshaft Lobe Lift

SPECIAL TOOL(S)

G04651832Courtesy of FORD MOTOR CO.
 Dial Indicator Gauge with Holding Fixture
100-002 (TOOL-4201-C) or equivalent
  1. Use a Dial Indicator Gauge with Holding Fixture to measure camshaft intake/exhaust lobe lift.
    • Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading to figure the camshaft lobe lift.
    • Refer to SPECIFICATIONS for the procedure.
      Fig 1: Identifying Camshaft Lobe Lift
      G03919772Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals