LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Engine Evaporative Emissions System >> General Procedures >> Evaporative Emission System Leak Test >> Phase 2 - System Leak Check

Phase 2 - System Leak Check

  1. Introduce smoke from the smoke machine into the EVAP system. For additional information, refer to the manufacturer's instructions.
  2. Use the halogen light provided with the smoke machine to look for smoke coming from the EVAP system. This would indicate a leak point.
  3. Repair any leaks as necessary.
  4. Repeat the leak test until the system passes.
scientia non olet · About LEMON Manuals