LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Engine Emission Control >> Removal And Installation >> Secondary Air Injection (AIR) Valve - 2.0L >> Removal and Installation

Removal and Installation

  1. Disconnect the secondary air injection (AIR) inlet, outlet and vacuum control hoses from the AIR valve.
  2. Remove the 2 bolts and the AIR valve.
    • To install, tighten to 9 Nm (80 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals