LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Cluster System >> Removal And Installation >> Instrument Cluster >> Removal and Installation

Removal and Installation

    NOTE: Prior to removal of the instrument cluster, it is necessary to upload the instrument cluster configuration information to the diagnostic tool. For additional information, refer to MODULE CONFIGURATION .
  1. Depower the supplemental restraint system (SRS). For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. Remove the 4 screws and the instrument panel lower panel.
    • Release the fastener.
  3. Remove the instrument cluster finish panel.
    • Remove the screw.
    • Unclip the upper steering column shroud from the lower steering column shroud.
    • Unclip the instrument cluster finish panel
    • Disconnect the electrical connector.
  4. Remove the 4 screws and the instrument cluster.
    • Disconnect the electrical connector.
  5. To install, reverse the removal procedure.
    • Download the instrument cluster configuration information from the diagnostic tool into the new instrument cluster. For additional information, refer to MODULE CONFIGURATION .
scientia non olet · About LEMON Manuals