Front Drive Halfshafts: Notes

• The front drive halfshafts have constant velocity joints at both ends to ensure that driving is smooth.
• Tripod joints (with tripod, running rollers and tripod housing) are fitted on the transmission side.
• The joints nearest the wheel are ball joints (with ball star, ball cage and ball shell).
• The left-hand tripod joint is secured in the differential with a snap-ring.
• The intermediate shaft (right-hand side) is secured in the differential by the intermediate shaft bearing.
• The tripod housing of the tripod joint for the right-hand front drive halfshaft and the intermediate shaft are attached as a unique part.
• The wheel-side constant velocity joints are attached to the wheel hubs.