LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Body & Frame >> Windows & Glass >> Removal And Installation >> Door Glass Top Run - Rear >> Removal and Installation

Removal and Installation

    All vehicles 

  1. Remove the rear door speaker. For additional information, refer to INFORMATION AND ENTERTAINMENT SYSTEM .
  2. Remove the side impact bolster.
  3. Position the door latch release handle aside.
    4. CAUTION: Do not touch the adhesive surface, as re-bonding will be impaired.
  4. Remove the watershield.

    5. Vehicles with manual windows 

  5. Install the window regulator handle.

    6. Vehicles with power windows 

  6. Connect the door glass operating switch electrical connector.

    7. All vehicles 

  7. Align the regulator clamp with the access hole.
    8. NOTE: Do not remove the glass from the door.
  8. Remove the window glass from the regulator.

    9. Vehicles with manual windows 

  9. Remove the window regulator handle.

    10. Vehicles with power windows 

  10. Disconnect the door glass operating switch electrical connector.
  11. Remove the door glass top run.
    Fig 1: Locating Door Glass Top Run
    G04654508Courtesy of FORD MOTOR CO.
  12. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals