LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sunroof >> Removal And Installation >> Roof Opening Panel Shield >> Removal and Installation

Removal and Installation

  1. Remove the roof opening panel glass. For additional information, refer to ROOF OPENING PANEL GLASS  in this article.
  2. With glass removed, place roof opening panel into the CLOSED position.
    3. NOTE: The 4 roof opening panel shield slides come as an assembly with the roof opening panel shield.
  3. With roof opening panel shield in full forward position, remove the 4 Torx® screws.
    • Remove the 2 front screws first to allow shield to slide further forward in track to expose 2 rear screws.
      Fig 1: Locating Panel Shield Screws
      G04654743Courtesy of FORD MOTOR CO.
  4. Lift the roof opening panel shield upward through roof opening.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals