Removal and Installation

Remove the headliner. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
Remove the load space floor covering.

Fig 1: Locating Load Space Floor Covering
Courtesy of FORD MOTOR CO.
Remove the scuff plate from the liftgate opening panel.
- Remove the 6 pin-type retainers.
  
  Fig 2: Locating Pin-Type Retainers
  Courtesy of FORD MOTOR CO.
Remove the C-pillar lower trim panel.
- Remove the 2 pin-type retainers.
  
  Fig 3: Locating C-Pillar Lower Trim Panel Pin-Type Retainers
  Courtesy of FORD MOTOR CO.
Remove the load space trim panel from the rear quarter trim panel.
- Remove the pin-type retainer.
  
  Fig 4: Locating Pin-Type Retainer
  Courtesy of FORD MOTOR CO.
Remove the load space trim panel.

Fig 5: Locating Load Space Trim Panel
Courtesy of FORD MOTOR CO.
Disconnect the rear drain hose from the roof opening panel.
Remove the rear drain hose.
- Release the 3 drain hose clips.
To install, reverse the removal procedure.