LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Removal And Installation >> Seat Backrest Latch - Rear, 4-Door >> Removal and Installation

Removal and Installation

  1. Fold the rear seat backrest(s) forward.
  2. Detach the backrest release cable.
  3. Remove the backrest latch cover.
    • Release the 2 retaining tangs.
      Fig 1: Locating Backrest Latch Cover
      G04654368Courtesy of FORD MOTOR CO.
  4. Remove the 2 backrest latch screws.
    • To install, tighten to 28 Nm (21 lb-ft).
  5. NOTE: Note the routing of the backrest release cable when removing it to aid installation.
    Fig 2: Removing Backrest Release Latch
    G04654369Courtesy of FORD MOTOR CO.
  6. Remove the backrest release latch.
  7. To install, reverse the removal procedure.